Corrosion is a naturally occurring phenomenon commonly defined as the deterioration of a substance (usually a metal) or its properties because of a reaction with its environment. Electrical interference is one of the threats that accelerate corrosion in buried metallic structures. This article examines the definition, nature, type and sources of electrical interference.
Definition of Electrical Interference
Electrical Interference is the passage of electrical current, from different sources, into buried metallic structures. Buried metallic structures include oil storage tank bottoms, pipelines, underground tanks and process vessels, or any other structure.
Types of Electrical Interference
Electrical Interference may be caused by electrical DC or AC systems and therefore are classified as DC interference or AC interference. Telluric current interference is another type of interference that is a result of the interaction of solar particles on the earth's magnetic field and is geomagnetically induced in the earth and in metallic structures on the earth. This type of interference will not be covered here.
Sources of DC Interference
DC interference is due to the passage of a direct current in a metallic structure through electrolytes. These currents are called stray currents and cause the structure-to-electrolyte potential to be more electronegative when current picks-up from the electrolyte to the pipeline, or be less electronegative when current discharges from the pipeline to the electrolyte. At current pick-up locations, over potential may occur, resulting in coating cathodic disbondment, while at current discharge locations where the structure-to-electrolyte potential is less than the cathodic protection criteria, corrosion is accelerated. (For more information, see Stray Current Corrosion and Preventive Measures.)
江苏快3There are multiple sources for DC interference, including cathodic protection systems, DC traction, high-voltage direct current (HVDC) systems and welding machines.
Cathodic Protection Systems
Pipelines belonging to different owners are commonly buried close to each other or in the same corridor, so a cathodic protection (CP) system for one pipeline will affect the other pipelines and cause DC interference. DC interference occurs due to the presence of a foreign pipeline in a anodic or cathodic voltage gradient of the protected pipeline and so there will be a potential difference between the two pipelines, protected and foreign, which force the current to pick-up or discharge. (Related reading: An Overview of Cathodic Protection Potential Measurement江苏快3.) In this case, electrical bonding between all pipelines is recommended at current discharge locations to mitigate accelerated corrosion.
DC Traction Systems
Direct current traction systems use their railways as the return path for the DC current where it's connected to the circuit negative. Although the railways are insulated from the earth, a small percentage of the total current leaks and passes through the earth as a negative path. However the leakage current is small with respect to the total current; it represents a few tens of DC current. This current is picked up in buried pipelines that are in close proximity to railways and discharge when the buried pipelines are close to the traction system substation's ground.
In urban areas where pipelines and infrastructure are prevalent, a great deal of current pick-up or discharge occurs between buried structures, which in turn accelerate corrosion and its consequences.
Welding machines that are used in the welding processes of metallic structures may accelerate corrosion in these structures due to the current that returns to its negative through the electrolyte. Therefore, the welded structure should be electrically bonded to the ground electrode of the welding machine.
江苏快3Welding operations on ships and barges have been known to create stray current interference, sometimes so severe that it has resulted in the sinking of the vessel. Interference arises where the negative of the welding generator is connected to the electrical ground on the vessel and there is no electrical bond between the vessel and the jacket.
High-voltage direct current systems operate in bipolar mode (positive and negative circuits with large grounding electrodes). In the case of bipolar mode, currents pass through both of the circuits with no interference. But, if faults exist then the system operates in unipolar mode and takes the earth, through the grounding electrodes, as the other circuit instead of the faulted one. In this case massive DC currents pass through the earth and in turn pass through any nearby metallic structures (even at large distances up to 1 km), causing DC interference.
Pipelines sharing common rights of way with AC transmission and distribution lines affect the electromagnetic field surrounding the power lines in either air or soil. This phenomenon is called AC interference. There are three mechanisms for AC interference: conductive (resistive) coupling, capacitive coupling and inductive coupling. AC interference affects both human safety and the pipeline's integrity.
AC corrosion江苏快3 causes leaks in pipelines that run parallel to power lines. AC corrosion occurs due to the energy induced in the pipeline by the electromagnetic field surrounding the power lines. While the induced energy is directly proportional to the length of parallelism between the pipeline and power lines, and the current intensity in the power lines, it is inversely proportional to the distance between the pipelines and the power lines.
Although AC corrosion is expected at a current density greater than 30 A/m2, it has been found more frequently at small holidays rather than large holidays. (Learn more about holidays in Coating Holidays & Pinholes: Chinks in the Armor江苏快3.) Therefore, AC corrosion threatens well-coated pipelines more than poorly-coated pipelines.